KYOCERA C2000 ERROR


KYOCERA C2000 ERROR

With kyocera copiers, every once in a while, you will come across this error code. what it means is that the toner is backed up in the toner auger in the drum and may have caused one of a variety of problems.

1. blown out the main motor
2. blown out the main board
3. blown drum unit

Here is your troubleshooting procedures…
get into your service mode and do a 906 reset and run some copies
if that does not work…
then go into service mode and do a 163 reset and run some copies
if that does not work…
then go into service mode and do a 130 toner churn and see if that breaks up the toner…
if that does not work…
pull out the drum unit…
look at the connectors in the back and see if they are broken…
then open drum unit and clean it out…( shortcut… open toner auger section and clean… if that does not work then you will have to take the drum unit completely apart…)

If that does not work then replace drum unit…
first and then main drive motor if issue remains
if issue remains then main board…

This entry was posted in Basics, Basics and tagged . Bookmark the permalink.

Leave a Reply

Your email address will not be published. Required fields are marked *

*

You may use these HTML tags and attributes: <a href="" title=""> <abbr title=""> <acronym title=""> <b> <blockquote cite=""> <cite> <code> <del datetime=""> <em> <i> <q cite=""> <strike> <strong>