BASIC PRESCRIBE COMMANDS EVERY KYOCERA COPIER TECHNICIAN SHOULD KNOW




BASIC PRESCRIBE COMMANDS EVERY KYOCERA COPIER TECHNICIAN SHOULD KNOW

NOTE:
BEFORE TRYING ANY OF THESE ….
BACKUP ALL DATA AND HAVE A FRESH COPY OF FIRMWARE HANDY
THIS IS NOT FOR THE AVERAGE USER…
I WONT BE HELD LIABLE IF YOU BRICK YOUR MACHINE…
SO DON’T TRY THIS UNLESS ITS YOUR LAST CHOICE BEFORE THROWING THE MACHINE ON THE JUNK PILE…

1. !R! STAT; EXIT; – print out a Status Page.
2. !R! STAT1; EXIT; – print out a Service Status Page.
3. !R! FRPO INIT; EXIT; – initialize the printer to return FRPO values to factory default.
4. !R! EGRE; EXIT; – initialize the engine board, resets all passwords.
5. !R! ELOG; EXIT; – print an Event Log: (FS models).
6. !R! ELOG ‘CLR’; EXIT; – reset the event log.
7. !R! TNRE; EXIT; – Initialize Toner (Small Printers)
8. !R! TNRE’INST’; STAT1; EXIT; – (Power off & On) Initialize Toner
9. !R! FRPO “parameter”, “value”; STAT1; EXIT; – Changing Parameters: (All KM and FS printers).
10.!R! ACNT “REST”;EXIT; – reset account code admin password.
11.!R! LFRE v,0;exit; – Developer unit counter reset – 9xxx series printers.
12.!R! LFRE F,0;exit; – Fuser unit counter reset – 9xxx series printers.
13.!R! KCFG “MTMD”, 3910000,1;exit; – Power Off/On will enable side output w/o finisher installed.
14.!R! KCFG “MTMD”, 3910000,0;exit; – Power off/on will disable side output w/o finisher installed.
15.!R! FPLC 0; EXIT; – Front Panel Lock, Unlocks panel.
16.!R! FRPO T0, 0; EXIT; – Change MP Mode from FIRST to CASSETTE.

THERE ARE MANY MORE COMMANDS BUT THIS SHOULD HELP WITH ALL THE BASIC ISSUES…

This entry was posted in Basics, Basics, Network, Tools and tagged . Bookmark the permalink.

Leave a Reply

Your email address will not be published. Required fields are marked *

*

You may use these HTML tags and attributes: <a href="" title=""> <abbr title=""> <acronym title=""> <b> <blockquote cite=""> <cite> <code> <del datetime=""> <em> <i> <q cite=""> <strike> <strong>