HOW TO CHANGE EMULATION ON PACEMARK 3410 PRINTER




HOW TO CHANGE EMULATION ON PACEMARK 3410 PRINTER

Changing Printer Settings
Depending on the form you want to print, you may need to change the printer
settings.
After selecting all appropriate settings, press  EXIT. The printer
settings are saved and you are ready to print the form.
The example below shows you how to change the CPI for 8 1/2 x 11 inch paper
from CPI 10 to CPI 17. Use the same procedure shown in this example to
change any printer setting.
1.
Press print QUALITY and CHARACTER PITCH
at the same time to enter Menu
Mode.
Menu Mode prints on the printer paper. You can use  GROUP,  ITEM,  SET, PRINT, and EXIT
to change printer settings.
2.
Press PRINT
to print the current printer settings.
Use the list of current printer settings to identify menus and to determine
which settings you need to change. For example, if you are changing the
CPI, change all occurrences of the CPI shown on the printout.
You can also use the Pacemark 3410 Triad Default Printer Settings table on
page 5 to identify printer menus, and as a reference to the Triad default
printer settings.
3.
Refer to the Printing Forms table on page 2 to determine the CPI for
8 1/2 x 11 inch paper. The table indicates that the CPI should be changed
from CPI 10 (the default) to CPI 17.
4.
Press
GROUP
until the text on the printer paper matches the example below:
Printer Mode Emulation EPSON FX
Font Print Mode HSD
5.
Press
ITEM
until the text on the printer paper matches the example below:
Printer Mode Emulation EPSON FX
Pitch I 10 CPI  (or any CPI)
For more details consult PRINTING FORMS WITH THE PACEMARK 3410
This entry was posted in Basics, Basics, Print and tagged , , , , , , . Bookmark the permalink.

Leave a Reply

Your email address will not be published. Required fields are marked *

*

You may use these HTML tags and attributes: <a href="" title=""> <abbr title=""> <acronym title=""> <b> <blockquote cite=""> <cite> <code> <del datetime=""> <em> <i> <q cite=""> <strike> <strong>